Pool PH And Chlorine Controller

Pool PH And Chlorine Controller

Product introduction The CHEMTROL 265 is a pool PH and Chlorine controller for easy chemical controlling. It is designed for high end swimming pool. Its sensor is very precise and easy to install and maintain. This model is a microprocessor-based digital ph and chlorine controller. This Pool PH...

Description

Shenzhen Hailanbao Technology Co., Ltd. is one of the leading manufacturers and suppliers of pool ph and chlorine controller in China. If you're going to wholesale easy-maintainable pool ph and chlorine controller, welcome to get quotation from our factory. All customized products are with high quality and competitive price.

 

Product introduction

The CHEMTROL 265 is a pool PH and Chlorine controller for easy chemical controlling. It is designed for high end swimming pool. Its sensor is very precise and easy to install and maintain. This model is a microprocessor-based digital ph and chlorine controller.

 

This Pool PH and Chlorine Controller’s all function is clearly labelled and accessible from the front panel,which allows you easily reset for safety.  Its free Chlorine concentration can be adjusted from 0.0-10.0 ppm, according to local Health Department regulation.The PH control level can be adjusted from 6.0-8.0. beyond the number, the water will be too acid or too alkaline which will hard your skin or pool devices.

 PH Chlorine controller

Advantages:

No reagent

No Maintenance

No Pressure regulator

The PPM sensor for free chlorine is not affected by CYA stabilizer or oxidizers, ensuring the accuration and reliability   

For automated water treatment

 

Specification:

1, free chlorine adjustable from 0.1-10.0ppm(mg/L) or from 0.01 to 3.00 for low chlorine level application.

2, PH control from 6.0-8.0

3, Free chlorine sensor is a solid state electrode with 3meter cable

4, PH sensor is a glass electrode with 3 meter cable

5, readout: PPM has 3 digits, PH has 2 digits

6, feed mode: automatic, manual, proportional

7, setpoint, calibration,limits and feed rate can be adjusted

8, owning leds for feed mode,feed status and alarms

9, cabinet is polystyrene material, size: 22x18x10cm

10, power supply: 110-230V, or 24VAC (specify)

11, plumbing is a Flow Cell Assembling with Y-stainer.

 

Communications:

Pool PH and Chlorine Controller Incorporates advanced communications including wireless, ethernet, internet, direct comport, dual up modem, RS485 and mod bus

 

Installation:

The Pool PH and Chlorine Controller is supplied with a detailed 12 pages instruction manual and a five year eletronics warranty. For better result, Flow Cell Assembly (FCA) is recommended on a bypass line as shown on the below diagram.

 PH chlorine analyzer for swimming pool

Pictures of FCA: 

Pool PH and Chlorine ControllerPool PH and Chlorine  analyzer


Hot Tags: pool ph and chlorine controller, China, manufacturers, suppliers, factory, wholesale, buy, quotation, discount, low price

You Might Also Like

Shopping Bags